· Fuel Hose - Complies with SAE J30R7 This SAE standard covers fuel, oil, or emission hose for use in coupled and uncoupled applications, for use with gasoline, oil, diesel fuel, lubrication oil, or the vapors present in either the fuel system or in the crankcase of internal combustion engines in mobile or stationary applications.
This Radium Engineering PCV/Fuel hose is found in our crankcase ventilation oil catch can systems and some fuel applications. Unlike heater hose, PCV/fuel hose resists engine oil, gasoline, diesel fuel, ethanol fuel (including E85), etc. NOTE: PCV/Fuel hose should not be used for all applications.-For submersible fuel hose, go HERE.
Specially designed low-pressure hose for gas and gas/ethanol blends in carbureted vehicle applications. Resists gas, oil and diesel fuel. (Not recommended for use with biodiesel – See J30R9).
Hot Air Blower Hose (Tank Truck, Dry Bulk Transport) Layflat Air Hose, Nitrogen Hose, Specialty. Fuel Line Hose: SAE 30R7, 30R9, Oil Cooler Hose. Garage Exhaust Hose (Crushproof Flarelok) , garden, and turf equipment. * Working pressure at 20C (68F) Meets the requirements of the International Marine H059 Marine Fuel-Oil-Lube Hose SAE J1942/1, NMMA³, 33CFR183, ABS Inner Tube
: Armor Mark
HBD/Thermoid, Inc., a subsidiary of HBD International, introduces the SAE J30R7 and SAE J30R9 Vapor-Loc Fuel Line Hoses. These hoses use the multi-layered Vapor-Loc Barrier System to keep fuel from permeating through the hose.
The same high-performing flexible rubber hose included in all Jagg oil cooler systems. Size: 3/8" Specifications met: SAE 30R7 Works great with: Jagg Hose Finishers on Push-on or Push-Lock fittings Black Oil Hose Clamps on Push-on or Push-Lock fittings
Fuel line, vapor emission and crankcase ventilation hose to SAE J30R7 specifications. Temperature range: -40 ºF to 257 ºF. Black Nitrile tube and Hypalon® cover with a single ply reinforcement of polyester. Also available in CARB and EPA constructions. (SAE 30R14).
Series 395 SAE J30R7 is designed to serve as fuel line/vapor emission hose in the majority of engines. Automotive Fuel Hose - Series 395 SAE J30R7 oil and weathering for a stronger durability Design Factor 5:1 enhances safety for engine and equipment Applications Low pressure fuel lines,
: Parker Hannifin
Recommended For: Low-pressure hydraulic oil return lines for general purpose water, glycol antifreeze solutions, conveying diesel fuel, gasoline or air. Meets SAE 30R2 performance requirements of both Type 1 and Type 2 for fuel and B20 constant contact up to 125° F biodiesel fuel transfer applications.
· 1158 Softwall Aromatic Fuel SAE 30R2 Type 2 Coolant Rubber Hose This hose is an excellent multipurpose hose which is designed for use in fuel transfer applications, such as, filler neck, where aromatic fuel resistance is required. This hose features a neoprene cover that is oil, heat, and ozone resistant. Cover Color : Black Oil Resistance : High
High pressure 1/2 inch black nbr rubber sae j30 r7 oil pipe fuel hose use for auto fuel system. Auto parts 3/8 inch 9.5mm black rubber sae 30r10 fuel hose for submerged in fuel tank. SAE J30R7 3/8 inch black nbr rubber oil resistant cotton overbraided fuel hose use for vw audi fuel system.
Service: For use in tank truck and in-plant operation to transfer diesel, biodiesel blends, B-100, ethanol blends, gasoline, oil and petroleum based products up to 60% aromatic content. Temperature range: …
This SAE Standard is intended to establish uniform methods for testing and evaluation of hose and hose assemblies for use in high temperature transmission oil systems and high temperature lubricating oil systems using petroleum base oils within a temperature range of -40 to 150 degrees C (-40 to 302 degrees F) and a maximum working pressure of 1.5 MPa (217 psi).